-
AV-8 is an excellent epoxy adhesive with high bonding strength and long pot life. It has good temperature resistance after curing and can be hardened at room temperature with other hardeners. It is widely used in the grinding wheel industry.
Product
Shelf Life
(week/25℃)
Curing Scheme
Tg*
Application Properties
AV-8
< 3
150℃/30mins
125 ℃
Basic type for general application
-
203AB is an epoxy resin infusion adhesive with low viscosity, fast defoaming, high transparency after curing. It's very suitable for infusion and filling of art.
Product
Mixing ratio
Gel Time
Curing Scheme
Tg*
Application Properties
203AB
3:1
< 2 hrs
50℃/ 4hrs
+
80℃/ 1hr
805℃
Clear coating and casting
-
AV-9 is an excellent epoxy adhesive with high bonding strength, long pot life and no sagging. It needs to be hardened under high temperature and has good temperature resistance after hardening.
Product
Shelf Life
(week/25℃)
Curing Scheme
Tg*
Application Properties
AV-9
< 4
150℃/30mins
125 ℃
No sagging at high temperature
-
190 AB is a two-parts adhesives in epoxy base with excellent infusion properties for motor insulation.
☆ Low viscosity
☆ Long pot life
☆ High temperature heat hardening
☆ High temperature resistance and good insulationProduct
Mixing ratio
(by weight)
Gel Time
Curing Scheme
Tg*
Application Properties
190AB
1:1
< 8 hrs
100℃/ 2hrs
+
150℃/ 2hrs
120 ℃
Motor rotor insulation
-
CR-008 is an excellent epoxy adhesive with non-sagging, high adhesion strength and long pot life, and can be hardened at high temperatures.
Product
Shelf Life
(week/25℃)
Curing Scheme
Tg*
Application Properties
CR-008
< 4
150℃/30mins
125 ℃
No sagging at elevated temperature,low CTE
-
260AB is a high quality epoxy resin with moderate viscosity and good handleability. It can be hardened at room temperature or heat hardened. It has high transparency and good adhesion to most substrates. It's very suitable for various materials.
Product
Mixing ratio
(by weight)
Gel Time
Curing Scheme
Tg*
Application Properties
260AB
10:1
30 mins
80℃ / 30 mins
50℃ / 4 hrs
25℃ / 24 hrs
90℃
Grinding wheel
-
836AB is a specially formulated epoxy adhesive which could cures at ambient temperature. It also could cure at elevated temperature for high mechanical performance. It has excellent bonding strength on most kind of substrates.
Product
Mixing ratio
(by weight)
Gel Time
Curing Scheme
Tg*
Application Properties
836AB
1:1
30 mins
25℃/ 24hrs
or
80℃/ 2hr
80 ℃
Basic type for general application
